dopetalk does not endorse any advertised product nor does it accept any liability for it's use or misuse

This website has run out of funding so feel free to contribute if you can afford it (see footer)

Author Topic: Morphine Freebase from MSContin  (Read 25461 times)

Offline thetalkingasshole (OP)

  • Self-Transforming Machine Elf
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jan 1970
  • Location: Somewhere between the sacred silence and sleep
  • Posts: 694
  • Reputation Power: 0
  • thetalkingasshole has hidden their reputation power
  • Last Login:July 06, 2019, 06:22:48 AM
  • Always with an arm out and a leg up
Morphine Freebase from MSContin
« on: October 05, 2015, 02:28:35 AM »
Hopefully some people will get some use from this

I crushed half a 100mg mallinckrodt mscontin
used harmonik's spoon crisp
 and heated it until it turned off-white/yellow

I then shocked it with 2mL nearly saturated solution of baking soda
following this I agitated it with a straight razor until the solids were totally dissolved
agitated again for another few minutes with the razor
then began to slowly heat the spoon containing the solution

After roughly less than a minute of direct heat
it produced a film that floats on top
It all solidifed into a gooey, white, bitter substance

Spreading it out on foil or wax paper helps dry it a bit
but it is ready to be vaporized as it comes out the spoon


Those of you who have cooked your own rock might say
no shit ya doodoo head this is how free base is born
but I could not find ONE single source for this on any other drug forum
so, have at it
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
As I grew up, I opened my eyes and saw the real world, and I began to laugh, and I haven't stopped since

Offline NZniceguy

  • Shareholder of Acetic Anhydride. Inc
  • Jr. Member
  • **
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location:
  • Posts: 138
  • Reputation Power: 12
  • NZniceguy is new on the scene.
  • Last Login:April 14, 2019, 06:58:43 PM
  • New Zealand's finest.
Re: Morphine Freebase from MSContin
« Reply #1 on: October 05, 2015, 07:42:30 AM »
That's very similar to how we do them over here.....but we dont crisp them first. We only get two brands of Morph here though. M-eslon (which we use the "pegging" method.......and Activas LA-Morph, which we use the baking soda method.
Get yourself some Acetic Anhydride man and give it a 15 minute cook in the oven on 150 degrees Celsius and try some homemade heroin mate!

If you need any more info, just hit me up. I know i'm going to have to describe both processes soon anyway seen as the old thread is gone.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Opus

  • Tech
  • Sr. Member
  • *
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: long windy bumpy ass road
  • Posts: 542
  • Reputation Power: 31
  • Opus is working their way up.Opus is working their way up.Opus is working their way up.
  • Last Login:May 06, 2018, 01:21:20 AM
  • 110, 100, 90, 80, 76, 70, 64, 60, 58
Re: Morphine Freebase from MSContin
« Reply #2 on: October 06, 2015, 06:14:10 AM »
Just my $.02, but pulling the M away from the rest of the crap before you vap that stuff would be... wise. Morphine is soluble in lots of stuff, I had great success with isopropyl and the HCL on I think it was the ABGs; but iso didn't work on another brand I tried. I had thought at the time maybe acetone might do it, but I never tried it.

friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No artist tolerates reality -- Freidrich Neitzsche

The word "republican" comes in the dictionary right after "reptile" and just before "repugnant." -- Julia Roberts

It is no measure of health to be well adjusted to a profoundly sick society -- Krishnamurti

Offline thetalkingasshole (OP)

  • Self-Transforming Machine Elf
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jan 1970
  • Location: Somewhere between the sacred silence and sleep
  • Posts: 694
  • Reputation Power: 0
  • thetalkingasshole has hidden their reputation power
  • Last Login:July 06, 2019, 06:22:48 AM
  • Always with an arm out and a leg up
Re: Morphine Freebase from MSContin
« Reply #3 on: October 06, 2015, 08:10:23 AM »
Just my $.02, but pulling the M away from the rest of the crap before you vap that stuff would be... wise. Morphine is soluble in lots of stuff, I had great success with isopropyl and the HCL on I think it was the ABGs; but iso didn't work on another brand I tried. I had thought at the time maybe acetone might do it, but I never tried it.

Since I was only doing 50mg
and even was a bit... clumsy (careless) so a bit was lost
even still this is the next step (isopropyl)

I can also get those monstrous fucking E 658 pills
 but I can imagine those would be better than mallinckrodts

Also there isnt shit online about an iso extract of MSContin
WASSUP WITH THAT?!?
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
As I grew up, I opened my eyes and saw the real world, and I began to laugh, and I haven't stopped since

Offline Opus

  • Tech
  • Sr. Member
  • *
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: long windy bumpy ass road
  • Posts: 542
  • Reputation Power: 31
  • Opus is working their way up.Opus is working their way up.Opus is working their way up.
  • Last Login:May 06, 2018, 01:21:20 AM
  • 110, 100, 90, 80, 76, 70, 64, 60, 58
Re: Morphine Freebase from MSContin
« Reply #4 on: October 06, 2015, 08:50:52 AM »
There was until opi went down.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No artist tolerates reality -- Freidrich Neitzsche

The word "republican" comes in the dictionary right after "reptile" and just before "repugnant." -- Julia Roberts

It is no measure of health to be well adjusted to a profoundly sick society -- Krishnamurti

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Morphine Freebase from MSContin
« Reply #5 on: October 06, 2015, 09:55:40 AM »
Ive been wanting to try my hand at homeback for many years now. I have access to a ton of 15MG Watson (abg) morphine, as well as an easy to access source of AA.
Which route would be the easiest for a novice to isolate (well, isolated enough for homebake) and freebase?

With the ABG's, could I remove the coatings and crush finely, then do a 91% isopropanol extraction to isolate morphine hcl then use baking soda to base it out? As for the isopropyl alcohol at 91% I could use Epsom salt to get it as close as anhydrous as possible, or just go get 99% isopropyl alcohol in the next town over.

I just want to get rid of as much of the gel in the ABG'S as possible because it would be really difficult to source chalky white morphine IR's in an oxym centric userbase.

In short - what's the best way to clean up Watson ABG morphines for freebase to H conversion?

Advice?
« Last Edit: October 06, 2015, 10:01:24 AM by theSWPK »
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Morphine Freebase from MSContin
« Reply #6 on: October 07, 2015, 04:17:46 AM »
? ;D
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Offline Opus

  • Tech
  • Sr. Member
  • *
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: long windy bumpy ass road
  • Posts: 542
  • Reputation Power: 31
  • Opus is working their way up.Opus is working their way up.Opus is working their way up.
  • Last Login:May 06, 2018, 01:21:20 AM
  • 110, 100, 90, 80, 76, 70, 64, 60, 58
Re: Morphine Freebase from MSContin
« Reply #7 on: October 08, 2015, 12:48:57 AM »
With way I was doing the purple 30s (I think those were ABG?) for awhile, you actually wanted water in the iso, without any water the M wouldn't come out.

The trick was to add a little HCl to the pill mass in 10-20ml %70 isopropyl and let it soak, then draw off the liquid and evap down to just a couple ml, and at that point I was adding sodium carbonate to base the M, and then continue evaporating to dryness (carefully!) under heat. At that point, you should have clean & dry morphine base. That worked really well on the purple 30s, then I started getting these weird green pills and they'd gel in the iso. Again I considered trying acetone, but never got around to it.

The basic premise was that the gel mechanism didn't work in the iso, so it was a lot like just doing a hot water pull and then evaporating the liquid off with a little carbonate at the end.

added: the HCl salt isn't very soluble in iso, so if you do this make sure there's enough water in there for the amount of M you're working with, should be ~1ml per 60mg.
« Last Edit: October 08, 2015, 12:59:05 AM by Opus »
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No artist tolerates reality -- Freidrich Neitzsche

The word "republican" comes in the dictionary right after "reptile" and just before "repugnant." -- Julia Roberts

It is no measure of health to be well adjusted to a profoundly sick society -- Krishnamurti

Offline thetalkingasshole (OP)

  • Self-Transforming Machine Elf
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jan 1970
  • Location: Somewhere between the sacred silence and sleep
  • Posts: 694
  • Reputation Power: 0
  • thetalkingasshole has hidden their reputation power
  • Last Login:July 06, 2019, 06:22:48 AM
  • Always with an arm out and a leg up
Re: Morphine Freebase from MSContin
« Reply #8 on: October 08, 2015, 06:44:22 AM »
With way I was doing the purple 30s (I think those were ABG?) for awhile, you actually wanted water in the iso, without any water the M wouldn't come out.

The trick was to add a little HCl to the pill mass in 10-20ml %70 isopropyl and let it soak, then draw off the liquid and evap down to just a couple ml, and at that point I was adding sodium carbonate to base the M, and then continue evaporating to dryness (carefully!) under heat. At that point, you should have clean & dry morphine base. That worked really well on the purple 30s, then I started getting these weird green pills and they'd gel in the iso. Again I considered trying acetone, but never got around to it.

The basic premise was that the gel mechanism didn't work in the iso, so it was a lot like just doing a hot water pull and then evaporating the liquid off with a little carbonate at the end.

added: the HCl salt isn't very soluble in iso, so if you do this make sure there's enough water in there for the amount of M you're working with, should be ~1ml per 60mg.

I have read that ISO is only effective for ABGs (Watsons)
And that its not recommended for Mallinckrodts or Endos

I haven't tried it with either, although I have access to both
somebody should fund this experiment
in the name of science
and getting really really really faded
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
As I grew up, I opened my eyes and saw the real world, and I began to laugh, and I haven't stopped since

Offline Thoms

  • "Is a sex God"
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jul 2015
  • Location:
  • Posts: 765
  • Reputation Power: 24
  • Thoms is now quite familiar.Thoms is now quite familiar.
  • Last Login:May 27, 2018, 01:32:26 AM
  • Welcome to our community forum ...
Re: Morphine Freebase from MSContin
« Reply #9 on: October 08, 2015, 02:20:58 PM »
I dk if i missed the point but those purple ones are abg 30s and i forget what the green are but to get it into a shot you just have to boil the water and quickly throw in the powder and draw. Heating after the pill is in the water makes it worse. I havent seen the filtered liquid gel again but it hasnt sat around for more that 5 er ten minutes. Good luck. Whats the ba of smoked morphine and wth would you want to do that. Not to be condescending.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Fear and self loathing in thoms.

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Morphine Freebase from MSContin
« Reply #10 on: October 08, 2015, 08:55:20 PM »
I dk if i missed the point but those purple ones are abg 30s and i forget what the green are but to get it into a shot you just have to boil the water and quickly throw in the powder and draw. Heating after the pill is in the water makes it worse. I havent seen the filtered liquid gel again but it hasnt sat around for more that 5 er ten minutes. Good luck. Whats the ba of smoked morphine and wth would you want to do that. Not to be condescending.

You need freebase morphine, not morphine sulfate, to use to make heroin with acetyl anhydride.
Nobody's smoking morphine.
« Last Edit: October 08, 2015, 08:58:07 PM by theSWPK »
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Offline thetalkingasshole (OP)

  • Self-Transforming Machine Elf
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jan 1970
  • Location: Somewhere between the sacred silence and sleep
  • Posts: 694
  • Reputation Power: 0
  • thetalkingasshole has hidden their reputation power
  • Last Login:July 06, 2019, 06:22:48 AM
  • Always with an arm out and a leg up
Re: Morphine Freebase from MSContin
« Reply #11 on: October 08, 2015, 11:42:12 PM »
I dk if i missed the point but those purple ones are abg 30s and i forget what the green are but to get it into a shot you just have to boil the water and quickly throw in the powder and draw. Heating after the pill is in the water makes it worse. I havent seen the filtered liquid gel again but it hasnt sat around for more that 5 er ten minutes. Good luck. Whats the ba of smoked morphine and wth would you want to do that. Not to be condescending.

cause im bored
and it would be VERY convenient to have something to put in a vaporizer pen
i have a nice coil system one on the way so i will let you know

you guys are a buncha fuckin squares
WHERE'S YOUR PIONEER SPIRIT!?

friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
As I grew up, I opened my eyes and saw the real world, and I began to laugh, and I haven't stopped since

Offline Opus

  • Tech
  • Sr. Member
  • *
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: long windy bumpy ass road
  • Posts: 542
  • Reputation Power: 31
  • Opus is working their way up.Opus is working their way up.Opus is working their way up.
  • Last Login:May 06, 2018, 01:21:20 AM
  • 110, 100, 90, 80, 76, 70, 64, 60, 58
Re: Morphine Freebase from MSContin
« Reply #12 on: October 08, 2015, 11:57:25 PM »
The point is separating the M from the rest of the crap in those pills, of which there is a shit ton, especially in the smaller doses. Trying to homebake 30s works, but the shots are nasty and jet black and leave a ton of crap in the spoon. If you clean the pills first, it's an entirely different hit.

I forgot (it's been awhile) about the wax part, which may or may not matter depending on what you're doing. If you want REALLY clean shit, you can do the first extraction with %100 iso and no hcl, and all you'll bring over is straight up wax, I swear you could make a very pretty little red candle with the shit. You can easily find %100 iso in auto parts stores as a fuel additive for drying gasoline, it's like Heat brand in the US, but in the red bottle NOT the yellow bottle, that's methanol. It's really easy to just do 1 pull with the %100, and then do the extraction like I described above and you'll get crunchy brown yummy Morphine in your drying vessel.

You actually can acetylate Morphine HCl, but most pills are M. Sulphate, for whatever that's worth..
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No artist tolerates reality -- Freidrich Neitzsche

The word "republican" comes in the dictionary right after "reptile" and just before "repugnant." -- Julia Roberts

It is no measure of health to be well adjusted to a profoundly sick society -- Krishnamurti

Offline Thoms

  • "Is a sex God"
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jul 2015
  • Location:
  • Posts: 765
  • Reputation Power: 24
  • Thoms is now quite familiar.Thoms is now quite familiar.
  • Last Login:May 27, 2018, 01:32:26 AM
  • Welcome to our community forum ...
Re: Morphine Freebase from MSContin
« Reply #13 on: October 09, 2015, 01:57:41 AM »
I figured i was missing a bit. Fair enough:)
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Fear and self loathing in thoms.

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Morphine Freebase from MSContin
« Reply #14 on: October 09, 2015, 02:00:05 AM »
You can only get up to 99% iso.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Tags:
 

Related Topics

  Subject / Started by Replies Last post
8 Replies
12505 Views
Last post October 20, 2015, 06:41:17 PM
by Chip
67 Replies
49455 Views
Last post December 17, 2015, 06:40:42 PM
by widowmaker
8 Replies
12111 Views
Last post February 27, 2019, 06:17:13 PM
by Lamsoi53
11 Replies
15890 Views
Last post December 22, 2016, 03:02:46 PM
by Thoms
11 Replies
21494 Views
Last post September 23, 2016, 09:31:24 PM
by Chip
16 Replies
13703 Views
Last post September 25, 2016, 10:33:21 AM
by candy
2 Replies
5779 Views
Last post February 11, 2017, 09:21:52 PM
by sk8phaze
6 Replies
8322 Views
Last post November 27, 2019, 06:48:27 AM
by Chip
5 Replies
6685 Views
Last post July 31, 2017, 05:57:31 AM
by Thoms
0 Replies
3718 Views
Last post July 02, 2019, 01:51:35 PM
by Chip


dopetalk does not endorse any advertised product nor does it accept any liability for it's use or misuse





TERMS AND CONDITIONS

In no event will d&u or any person involved in creating, producing, or distributing site information be liable for any direct, indirect, incidental, punitive, special or consequential damages arising out of the use of or inability to use d&u. You agree to indemnify and hold harmless d&u, its domain founders, sponsors, maintainers, server administrators, volunteers and contributors from and against all liability, claims, damages, costs and expenses, including legal fees, that arise directly or indirectly from the use of any part of the d&u site.


TO USE THIS WEBSITE YOU MUST AGREE TO THE TERMS AND CONDITIONS ABOVE


Founded December 2014
SimplePortal 2.3.6 © 2008-2014, SimplePortal