dopetalk

Core Topics => Drugs => Cannabis and Cannabinoids => Topic started by: sk8phaze on May 08, 2016, 03:14:03 AM

Title: Project Stealth Vape
Post by: sk8phaze on May 08, 2016, 03:14:03 AM
     Hello to all my fellow D&u'ers! For quite sum time ive been contemplating a convenient yet low key way to get well on the regular. Hence...."The DiaVape!" Now to see how successful my efforts would be without the UTFSE or YouTube.  Lets give this a try: Beta V.1.0

So here is a spent vape pen from a cannabis shop, and .1 of tar


* image.jpg (39.73 kB . 600x600 - viewed 632 times)

I measured out the inside volume of the vape champer and its about 40units(4/10 of 1cc) the more  concentrated the better.


* image.jpg (61.86 kB . 600x600 - viewed 608 times)

All set, fully charged battery, 15-20 units
Ready to test it's  functionality. I'll update results
Soon.

***UPDATE***
It works great! At first it was 80% steam & 20 % product, but then once the water evaporates it got real-concentrated and Gooey. it worked excellent.
Title: Re: Project Stealth Vape
Post by: Z on May 08, 2016, 07:24:43 AM
I remember a friend making a stealth vape for vaping in movies.  He took one of the vapes with the airflow sensor that turn on when you inhale.  He wedged it inside the end of a cut down straw, and put the whole thing inside an empty coke cup from the cinema.  That's it, done.  The longer you hold it in the less vapour there is.
Title: Re: Project Stealth Vape
Post by: Mr.pooper on May 08, 2016, 04:11:14 PM
How effective do you think it is compared to foil?

I've always wanted to try that with a few different types of drugs.

The standard vape heating skillets for wax worked well for a couple solid hits , but always had to be reloaded every few hits. Which is why I love the pre-loaded tank idea.

Is chiva soluble in propylene  glycol , PEG, or glycerine? That's the standard base most companies use  in their vape pens. Might work better than water .

Title: Re: Project Stealth Vape
Post by: sk8phaze on May 08, 2016, 06:49:42 PM
How effective do you think it is compared to foil?

I've always wanted to try that with a few different types of drugs.

The standard vape heating skillets for wax worked well for a couple solid hits , but always had to be reloaded every few hits. Which is why I love the pre-loaded tank idea.

Is chiva soluble in propylene  glycol , PEG, or glycerine? That's the standard base most companies use  in their vape pens. Might work better than water .



Yeah i'm having the same problems, water does not seem to be a good medium to use in vapes, too much steam and not enough concentrated diamorph. Also, when I bought this vape pen it was designed for THC Honey Oil. So maybe an oil medium and more dope in it. The only reason i tried such a small amount was because if it didn't work I didn't want to waste a lot. So far @Mr.pooper foil seems to hit harder but smoking off aluminum isnt good for the lungs/body(from anecdotal stories)  i also have some speed. I was thinking about making a goofball vape. I'll explain in my second try.

                   ***Stealth DiaVape Beta Version 2.0 in progress ****
       
Title: Re: Project Stealth Vape
Post by: Zoops on May 08, 2016, 09:55:35 PM
Why not mix some dope with honey oil and vape that? That should work like a dream.
Title: Re: Project Stealth Vape
Post by: Mr.pooper on May 09, 2016, 05:29:26 AM
Why not mix some dope with honey oil and vape that? That should work like a dream.

Think the tar will dissolve into the honey oil? That would be some tasty vape hits
Title: Re: Project Stealth Vape
Post by: Zoops on May 09, 2016, 08:31:23 AM
Think the tar will dissolve into the honey oil? That would be some tasty vape hits

Yes, I'd bet money that it does. You would defo have to heat it up though.
Title: Re: Project Stealth Vape
Post by: FlorAtive on June 08, 2017, 11:21:01 PM
This is a thread we should stay on. I was considering what to do with my fresh growing poppy plants once they reach maturity. My first thought was to begin research on what to do with the latex and then wanting to move it to a PG/VG solution for vaping if at all possible. I think that would be wonderful. It's all new to me.
Title: Re: Project Stealth Vape
Post by: Mr.pooper on July 13, 2017, 07:15:54 AM
This is a thread we should stay on. I was considering what to do with my fresh growing poppy plants once they reach maturity. My first thought was to begin research on what to do with the latex and then wanting to move it to a PG/VG solution for vaping if at all possible. I think that would be wonderful. It's all new to me.
I agree this is a thread with some potential!
Title: Re: Project Stealth Vape
Post by: MoeMentim on May 29, 2018, 06:17:52 AM
if anyone is thinking about trying to vape h on the go id suggest forgoing making it an e-juice and look for a QUALITY mj concentrate atomizer.  not those cheap glass dome ones.  this isn't based on experience vaping h, ive been opiate free (excusing a handful of chips) for 5 years.  but first few years of h was smoking and i've tried every way of vaping mj concentrates including making my own e-juice.  i finally settled on an atomizer called the "saionora."  it's no longer listed on humbolt vapes' site, looks like it got updated and re-named.  it's designed to be used with a mod & that will give you infinite wattage adjustment to narrow in on the right temp for tar.  there's many choices of coil types, mine uses a ceramic wick that and thick wire that make it sturdy and long lasting.  i use it at 20-25 watts & turn it up to 30 to burn any gunk off.  knowing how muck black soot tar leaves on foil that's probably important.  it also has narrow walls that hug the coils so any liquified product can't run off and away from the coil.  some coils can be used with temp control which lets you ramp up to temp fast & not overshoot your target temp.  i haven't messed with temp control, i usually (with mj) press the button, wait 2 seconds, inhale & once i start to sense the hit in my throat i'll pulse the button to avoid overheating.

  id be curious to hear results if anyone has tried a set up like this for tar.  heres a link to the atomizer in the form i have:

https://milehighsupplies.com/shop/saionara-atomizer-tank/
SimplePortal 2.3.6 © 2008-2014, SimplePortal