dopetalk does not endorse any advertised product nor does it accept any liability for it's use or misuse

This website has run out of funding so feel free to contribute if you can afford it (see footer)

Author Topic: Prepping 30mg MSContin Mallies for IV  (Read 13708 times)

Offline QuickShooter (OP)

  • Newbie
  • Join Date: Aug 2015
  • Location:
  • Posts: 15
  • Reputation Power: 3
  • QuickShooter is new on the scene.
  • Last Login:May 02, 2018, 03:39:20 AM
  • Welcome to drugs-and-users !
Prepping 30mg MSContin Mallies for IV
« on: July 17, 2016, 03:26:47 PM »
I've looked through Google's search results for the last two hours, and have found nothing I'm all that comfortable with. I thought I'd ask here, because, well, I just trust the people here more. So any advice? I've tried the hot salt water method, although I'm not sure I did it correctly. Got a decent rush, but little high when I did so. Maybe I expected too much, but my tolerance was on the low side of moderate.

Thanks for any replies!
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Thoms

  • "Is a sex God"
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jul 2015
  • Location:
  • Posts: 765
  • Reputation Power: 24
  • Thoms is now quite familiar.Thoms is now quite familiar.
  • Last Login:May 27, 2018, 01:32:26 AM
  • Welcome to our community forum ...
Re: Prepping 30mg MSContin Mallies for IV
« Reply #1 on: July 17, 2016, 03:54:53 PM »
Those are the purple mbox ones right? If so the best prep for us was always cold water, as much water as you can fit. You have to use at least a 3 ml barrel you can only get 60 mg of mprphine in a ml of water but that's in a perfect world. It always seemed like prepping those pills I could only get about five pills into solution. When doing those mallis I would use 4 Mls of water to break down three pills and pull as much water back as I could and then use another spoon to fix two more using the same water as the first pills. I would of course have to add more water in. The key here is you have to work fast, I always had more than one barrel to use so I could add more water to the spoon if need be. Anyway work fast and keep the water cold.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Fear and self loathing in thoms.

Offline Snoop

  • Jr. Member
  • **
  • SA_Chat+
  • **
  • Join Date: Jul 2015
  • Location:
  • Posts: 189
  • Reputation Power: 14
  • Snoop is new on the scene.
  • Last Login:February 02, 2020, 11:11:54 PM
  • Welcome to our community forum ...
Re: Prepping 30mg MSContin Mallies for IV
« Reply #2 on: July 17, 2016, 10:41:57 PM »
^this.

Remember to rotate sites :)
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Prepping 30mg MSContin Mallies for IV
« Reply #3 on: July 18, 2016, 01:01:39 AM »
I always had success prepping no more than 2 at a time.
Put them into your spoon/cooker/container crushed into a fine powder (as fine as you can get - remove coating, crush, the put in some paper folded in half with the ends folded so now powder comes out and use a credit card to crush the chunks into powder).

Add a tiny pinch of table salt, like the size of a BB/third of an English pea.

Have a cup of water with ice. Draw up 100 units of water and mix up the powder.

Have 2 pretty wet cottons ready. They have to be rolled into a ball and already wet so they won't expand when dropped into the solution.

Drop one cotton in on one side and draw up until you can't anymore. Drop the other cotton on the other side, which should still be wet, and draw up the remainder. At this point you can scoot the cottons around and attempt to get any remaining liquid.

If you still have enough space in your needle, add one or two drops of water back in to the spoon/cooker to try and get the rest.

Work fast as the gel will begin to form soon after the water is added.

Enjoy.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Offline QuickShooter (OP)

  • Newbie
  • Join Date: Aug 2015
  • Location:
  • Posts: 15
  • Reputation Power: 3
  • QuickShooter is new on the scene.
  • Last Login:May 02, 2018, 03:39:20 AM
  • Welcome to drugs-and-users !
Re: Prepping 30mg MSContin Mallies for IV
« Reply #4 on: July 18, 2016, 12:21:11 PM »
Thanks everyone! I tried my best to implement all that you said. Success. However, I tried the boiling salt water method after words and felt more with the hot water. I'm not too worried about what goes into solution with the hot water. I always cool what's in the rig and re-filter once it's cool; I also use pills very infrequently. Sister M's solubility in water also isn't an issue for me, I'm only prepping 30mg at a time.

I'm not sure exactly what's going on with these little purple bastards, but I seem to have gotten a working solution for me. Thanks again!

If anyone in the future is having trouble prepping these, just let me know, and I'll write something up. The system I have seems to work very well.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline theSWPK

  • Oxymorphone Overlord
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jun 2015
  • Location: Missississississippi
  • Posts: 818
  • Reputation Power: 36
  • theSWPK is working their way up.theSWPK is working their way up.theSWPK is working their way up.
  • Gender: Male
  • Last Login:March 16, 2023, 07:00:11 PM
  • Welcome to active addiction!
Re: Prepping 30mg MSContin Mallies for IV
« Reply #5 on: July 18, 2016, 02:55:01 PM »

little purple bastards


Haha, that they are.
Glad you were able to get high-ish.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Now fixing in a parking lot near you!







"And you dont know my complexity." - Riddick

Offline Chip

  • Server Admin
  • Hero Member
  • *****
  • Administrator
  • *****
  • Join Date: Dec 2014
  • Location: Australia
  • Posts: 6648
  • Reputation Power: 0
  • Chip has hidden their reputation power
  • Gender: Male
  • Last Login:Today at 05:29:51 AM
  • Deeply Confused Learner
  • Profession: IT Engineer
Re: Prepping 30mg MSContin Mallies for IV
« Reply #6 on: July 19, 2016, 02:17:29 AM »
What is it with purple and morphine?

We have purple morphs here too and I don't remember seeing any other vividly purple pills other than them.

I hope you removed the purple coloring with something because purple shots just don't sound right to me.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Our Discord Server invitation link is https://discord.gg/jB2qmRrxyD

Offline QuickShooter (OP)

  • Newbie
  • Join Date: Aug 2015
  • Location:
  • Posts: 15
  • Reputation Power: 3
  • QuickShooter is new on the scene.
  • Last Login:May 02, 2018, 03:39:20 AM
  • Welcome to drugs-and-users !
Re: Prepping 30mg MSContin Mallies for IV
« Reply #7 on: August 04, 2016, 11:55:57 AM »
Couldn't tell ya, it's kinda neat though.

As far as the coating I certainly did remove it. However, I LOVE purple shots! The IR 30mg Oxycodone here have a blue tint, one brand is especially vibrant. When you jack back it makes for a lovely purple colored shot. I always got some sort of perverse pleasure out of it.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Kitkat

  • Newbie
  • Join Date: Sep 2016
  • Location:
  • Posts: 4
  • Reputation Power: 2
  • Kitkat is new on the scene.
  • Last Login:September 23, 2016, 09:43:40 PM
  • HR Networking
Re: Prepping 30mg MSContin Mallies for IV
« Reply #8 on: September 23, 2016, 09:33:29 PM »
Ms one of my favs...wash color off (I use 4+ at a time but use your best judgement only you know your tolerance) place in your cooker with a full cap from bottom of your point of water (will be a little over 1ml. Of water) heat until water starts to boil remove from heat crush with top cap of your point then add a pinch of Epsom salt NOT table salt mix up will if it's a little thick looking that means you let it cool too much return to heat just to before it starts hard boiling remove and draw up quickly with a good size cotton best to use half a cig filter cool under some cold tab water for about 20 seconds and enjoy
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Kitkat

  • Newbie
  • Join Date: Sep 2016
  • Location:
  • Posts: 4
  • Reputation Power: 2
  • Kitkat is new on the scene.
  • Last Login:September 23, 2016, 09:43:40 PM
  • HR Networking
Re: Prepping 30mg MSContin Mallies for IV
« Reply #9 on: September 23, 2016, 09:43:40 PM »
One other thing if it doesn't fill your 1ml point add a little more water to your cooker reheat stir and draw up until you have a full point also can get a pretty good wash afterwards
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions

Offline Thoms

  • "Is a sex God"
  • Sr. Member
  • ****
  • SA_Chat+
  • **
  • Join Date: Jul 2015
  • Location:
  • Posts: 765
  • Reputation Power: 24
  • Thoms is now quite familiar.Thoms is now quite familiar.
  • Last Login:May 27, 2018, 01:32:26 AM
  • Welcome to our community forum ...
Re: Prepping 30mg MSContin Mallies for IV
« Reply #10 on: September 24, 2016, 01:06:11 AM »
the solubility of morphine is only 60 mgs per milliliter. If you are trying to fit more than that into a 1 ml barrel you are throwing away drugs. Thus why I say use 3 ml barrels.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Fear and self loathing in thoms.

Offline Tainted

  • Psychonaut former narcotics connoisseur
  • Full Member
  • ***
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: florida
  • Posts: 358
  • Reputation Power: 9
  • Tainted is new on the scene.
  • Gender: Male
  • Last Login:October 31, 2021, 08:16:02 PM
  • Former Moderator
Re: Prepping 30mg MSContin Mallies for IV
« Reply #11 on: September 24, 2016, 02:37:43 PM »
What is it with purple and morphine?

We have purple morphs here too and I don't remember seeing any other vividly purple pills other than them.

I hope you removed the purple coloring with something because purple shots just don't sound right to me.

they used the colors to color code doses, for the most part, in the US. purple = 30mg, peach = 60mg greyish blueish = 100mg. some brands are exception to that, like endo 30s are green

the solubility of morphine is only 60 mgs per milliliter. If you are trying to fit more than that into a 1 ml barrel you are throwing away drugs. Thus why I say use 3 ml barrels.

you dont get cotton fever or anything from using 3ml barrells? i made my own 3+ml syringes by buying an oral syringe at the store , cutting a legit syringe around the 5 unit mark and jamming it onto the end of the oral syringe (worked pretty damn well, mostly) but i got BAD cotton fever EVERY time i used it. i used brand new syringes, i tried cleaning the oral syringe, buying new oral syringes from different stores made by different companies, still got cotton fever EVERY time. it worked soooo much better but i got sick as fuck every time, i kept it up for like 2 weeks before i decided to stop trying to inject more than 1cc at a time.


and that table salt method im still calling bullshit on. i guess im doing something wrong since so many people online have had success with it, but salt doesn't do a fuckin THING to stop it from gelling, regardless of the brand. Ice water for ABGs and the new version of ABG and boil drop for everything else. boil drop honestly works SO much better than any other method. ive started to prefer the M's and whatnot more than ABG.



friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
"Sometimes we live no particular way but our own
And sometimes we visit your country and live in your home
Sometimes we ride on your horses, sometimes we walk alone
Sometimes the songs that we hear are just songs of our own" -GD

Offline Chip

  • Server Admin
  • Hero Member
  • *****
  • Administrator
  • *****
  • Join Date: Dec 2014
  • Location: Australia
  • Posts: 6648
  • Reputation Power: 0
  • Chip has hidden their reputation power
  • Gender: Male
  • Last Login:Today at 05:29:51 AM
  • Deeply Confused Learner
  • Profession: IT Engineer
Re: Prepping 30mg MSContin Mallies for IV
« Reply #12 on: September 24, 2016, 06:22:06 PM »
Use sterile 3 ml. barrels and a sterile tip, the ones from NSP's.

Never had any problems with them.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Our Discord Server invitation link is https://discord.gg/jB2qmRrxyD

Offline Tainted

  • Psychonaut former narcotics connoisseur
  • Full Member
  • ***
  • SA_Chat+
  • **
  • Join Date: Aug 2015
  • Location: florida
  • Posts: 358
  • Reputation Power: 9
  • Tainted is new on the scene.
  • Gender: Male
  • Last Login:October 31, 2021, 08:16:02 PM
  • Former Moderator
Re: Prepping 30mg MSContin Mallies for IV
« Reply #13 on: September 24, 2016, 07:08:25 PM »
Use sterile 3 ml. barrels and a sterile tip, the ones from NSP's.

Never had any problems with them.

whats NSP?

i am pretty sure they dont sell them sterile in the US (in actual stores, you can obv get anything online) i have SOOOO much trouble finding anywhere that sells syringes. ive been to every pharmacy within an hour of driving and it took years and hundreds of failed attempts to even find a store that sells 1cc syringes no questions asked. the obvious answer is to just order them online but thats not really an option for me. i had a thread on opiophile about this and the recommendation i got was to do the oral syringe way i described.

but honestly, i wouldn't think the cotton fever was being caused by the syringe itself. i changed out which brands/types of oral syringes i used 3 or 4 times, i used brand new needles, i cleaned the oral syringe originally with rubbing alcohol and after i got cotton fever a few times i tried using bleach (which was rinsed really well afterwards as injecting bleach is a major fear of mine) and if i used the setup to just inject 1cc i didn't get sick.

i just assumed that it was being caused because i was injecting 3cc's of not-sterile water somewhat quickly (its kinda hard to not inject it fast when your using a 10cc plunger/rig setup. you push it on really lightly and inject 1 cc)

OH something else i just remebered, the cotton fever wasn't EXACTLY like regular cotton fever. like normal cotton fever i feel FREEZING get a high temp, shiver a lot, etc. but when i used the 3cc syringes i wouldn't shiver, i wouldn't feel cold, id feel like my skin was on fire (and it wasn't just me, i was hot to the touch) and id get real high fever, but it just felt different from cotton fever.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
"Sometimes we live no particular way but our own
And sometimes we visit your country and live in your home
Sometimes we ride on your horses, sometimes we walk alone
Sometimes the songs that we hear are just songs of our own" -GD

Offline Chip

  • Server Admin
  • Hero Member
  • *****
  • Administrator
  • *****
  • Join Date: Dec 2014
  • Location: Australia
  • Posts: 6648
  • Reputation Power: 0
  • Chip has hidden their reputation power
  • Gender: Male
  • Last Login:Today at 05:29:51 AM
  • Deeply Confused Learner
  • Profession: IT Engineer
Re: Prepping 30mg MSContin Mallies for IV
« Reply #14 on: September 24, 2016, 07:16:51 PM »
NSP = Needle and Syringe Programs.

Can't you order them online ?

You might want to try sterile water too. Apart from that, I don't know why you are introducing such bacteria into your technique.
friendly
0
funny
0
informative
0
agree
0
disagree
0
like
0
dislike
0
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
No reactions
Our Discord Server invitation link is https://discord.gg/jB2qmRrxyD

Tags:
 

Related Topics

  Subject / Started by Replies Last post
30 Replies
52882 Views
Last post April 20, 2017, 12:09:42 PM
by Z
27 Replies
25467 Views
Last post October 23, 2015, 01:27:08 AM
by theSWPK
18 Replies
35491 Views
Last post December 21, 2016, 08:17:10 AM
by dillydudeEL14
11 Replies
15894 Views
Last post December 22, 2016, 03:02:46 PM
by Thoms
11 Replies
21503 Views
Last post September 23, 2016, 09:31:24 PM
by Chip
1 Replies
5984 Views
Last post April 04, 2018, 06:25:23 PM
by Methadone


dopetalk does not endorse any advertised product nor does it accept any liability for it's use or misuse





TERMS AND CONDITIONS

In no event will d&u or any person involved in creating, producing, or distributing site information be liable for any direct, indirect, incidental, punitive, special or consequential damages arising out of the use of or inability to use d&u. You agree to indemnify and hold harmless d&u, its domain founders, sponsors, maintainers, server administrators, volunteers and contributors from and against all liability, claims, damages, costs and expenses, including legal fees, that arise directly or indirectly from the use of any part of the d&u site.


TO USE THIS WEBSITE YOU MUST AGREE TO THE TERMS AND CONDITIONS ABOVE


Founded December 2014
SimplePortal 2.3.6 © 2008-2014, SimplePortal